Latest news from Heavy Lift & Project Forwarding International Magazine

Heavy Lift Across the World

Myshak skids with Hydra-Slide

Canada-based Myshak Crane & Rigging has utilised its Hydra-Slide hydraulic skidding equipment to replace a 514-tonne converter at a fertiliser production plant in Alberta.

A 300-ton (272.2-tonne) capacity heavy track HT300 skidding system, in combination with a a 350-ton (348.9-tonne) capacity low-profile LP350 hydraulic skidding system, was used to move the equipment over a 50 m track.

The old converter shell, complete with basket and catalyst, measured 32 m in length and had a diameter of 2.7 m. The unit was jacked up and skidded horizontally in one piece to an open area where it was loaded onto SPMTs.

This made room for the installation of the larger converter shell, which weighed 520.2 tonnes with the basket and measured 3 m in diameter and 35 m in length.

The replacement unit was skidded across the track into position over the foundations and lowered onto the anchor bolts.

Six JLS250 jacking load shoes were hydraulically connected in a three-point suspension to lift and slide the converters on the HT300 track.

www.hydra-slide.com

myshakgroup.com

Heavy Lift | News

Andreone joins PRPA board thumbnail image

Andreone joins PRPA board

June 11 - Rita Andreone has been appointed to the Prince Rupert Port Authority (PRPA) board of directors for a term of three years, effective June 2, 2019.
Views: 736
Broshuis wins EUR50 mn trailer order thumbnail image

Broshuis wins EUR50 mn trailer order

June 7 - US Army Tank-automotive and Armaments Command (TACOM), in collaboration with Oshkosh Defense, placed an order with Broshuis for 170 PL2 pendular axle semi-low loaders.
Views: 1064

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.