Latest news from Heavy Lift & Project Forwarding International Magazine

New Airbus BelugaXL on route to maiden flight

In preparation for its upcoming maiden flight, Airbus’ first BelugaXL is now in its heavy ground test phase – which focuses on the highly modified airframe for this next-generation oversize cargo airlifter.

 

Heavy ground tests started with the team weighing the first BelugaXL at 'pitch zero' and then at 'pitch nine', lifting the aircraft’s nose by 3.5 m to determine the empty weight centre of gravity. Next, they performed the standard loads and horizontal tailplane tests, which were followed by separate evaluations involving the dorsal fin and vertical tailplane.

The heavy ground test phase involves carrying out tests on the aircraft that would usually be conducted on a static cell. “It is unusual for us to perform tests like load calibration using the generalised finite element method of analysis on an aircraft which will fly, as we usually use a dedicated clean aircraft without any systems inside,” explained BelugaXL aircraft configuration leader, Arnaud Puyo.

HLPFI understands that only five BelugaXL planes will be built, and the model used for ground testing is also the flight prototype.  

With the load calibration test campaign completed, the team then began ground vibration testing performed in conjunction with the French ONERA aerospace research centre and DLR, the German aerospace research centre. 

The eight-day ground vibration campaign saw the BelugaXL tested while both empty and fully loaded. The activity required one week of intensive preparation during which the aircraft was put on pneumatic suspension and special shakers were installed to simulate the vibrations the aircraft will come under during flight.

The team identified 30 different locations for the 80 kg shakers and during tests lasting two-to-three hours, sensors inside and outside the aircraft measured the structure’s response. Vibration data from the test are used in validating and improving structural dynamic models for the aircraft.

With the ground vibration tests now complete, subsequent steps ahead of the aircraft’s maiden flight include validating the flight test instrumentation and applying the BelugaXL’s special 'smiling' livery.

Starting in mid-2019, the BelugaXL will gradually replace the existing five-strong Beluga ST fleet – which is currently used for carrying complete sections of Airbus aircraft from different production sites around Europe to the final assembly lines in Toulouse, France and Hamburg, Germany.

The BelugaXL was launched in November 2014 to address the transport and ramp-up capacity requirements for Airbus beyond 2019. "Our programme is evolving. Today, the Beluga cannot load two wings of an A350 at the same time. We must send them one by one in the cargo bay, lying at 45 degrees. This doubles our transportation costs,” Bertrand George, director of the BelugaXL programme told Ouest France. 

The first of the five BelugaXLs is scheduled to make its maiden flight in summer 2018 and enter into service in 2019.

www.airbus.com

Heavy Lift | News

ACS opens Shanghai office thumbnail image

ACS opens Shanghai office

March 21 - UK-based charter broker Air Charter Service (ACS) has opened a new office in Shanghai as part of its expansion in the Far East.
Views: 267
Hojland up at Saudia Cargo thumbnail image

Hojland up at Saudia Cargo

March 18 - Saudia Cargo has appointed Per Hojland as executive director, cargo operations worldwide.
Views: 515
ABC in motor move thumbnail image

ABC in motor move

March 13 - AirBridgeCargo Airlines (ABC) has delivered an ABB motor from Västerås in Sweden to Shanghai, China, on behalf of Greencarrier Freight Services.
Views: 1230
Bauckham returns to ACS thumbnail image

Bauckham returns to ACS

March 12 - Tony Bauckham, former ceo of Air Charter Service (ACS), has returned the charter broker as a Brexit consultant.
Views: 1228

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.