Latest news from Heavy Lift & Project Forwarding International Magazine

Enerpac JS-500 performs shovel undecking first

Elko Wire Rope has used Enerpac’s JS-500 Jack-up System to lift a 1,500-ton (1,350.8 tonne) electric rope shovel at a copper mine in the USA.

It was necessary to lift the machine for a 60-day inspection and maintenance project and the JS-500 was “a perfect match” for the job, said Mike Beres, sales director – Americas for heavy lifting technology at Enerpac.

He explained: “We have the product to do the lifting of the equipment and Elko has the capability for building the attachments to integrate to the equipment. They have extensive knowledge of tooling to adapt to the shovel.”

After compacting and levelling the ground for the assembly of the jack-up system, and removing some components from the shovel, the team positioned two jacks under the counterweight at the rear of the shovel, and two under the main boom section.

Elko also fabricated and welded lifting jigs to the front of the shovel.

Enerpac’s EVO synchronous lift system, meanwhile, was placed under the car body, which made slight adjustments to the alignment of the pin going through the center of the machine during the lift of the upper deck.

Corey Reynolds, commercial manager at Enerpac, said: “While the lift was being done the team monitored the level of the car body and upper revolving deck from inside the machine to confirm clearance around the pin and to make adjustments to the car body with the EVO system, all while they did the lift on the outside with the jack-up system. This was a unique feature for shovel undecking that hasn’t been done before.”

enerpac.com

Heavy Lift | News

ALE loads out in China thumbnail image

ALE loads out in China

September 6 - ALE has loaded out an 18,000-tonne topside at a yard in Zhuhai, China.
Views: 1014
RRS plans open house event thumbnail image

RRS plans open house event

August 14 - Rapid Response Solutions (RRS) will showcase the entire range of Hydra-Slide skidding equipment at its Portsmouth, UK facility on September 10, 2019.
Views: 1583
Hill completes exchanger swap thumbnail image

Hill completes exchanger swap

August 12 - Hill Crane & Rigging (HCR) has used a 500-ton (453.6-tonne) capacity heavy track HT500 hydraulic skidding system from Hydra-Slide to replace a stacked heat exchanger at a refinery in Carson, California.
Views: 1582
ALE on the double in Mauritania thumbnail image

ALE on the double in Mauritania

August 6 - ALE has transported and installed two transformers for the Boulenouar wind farm project in Mauritania.
Views: 1939

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.