MJ van Riel lifts with Enerpac

The Netherlands-based MJ van Riel, a specialist in the relocation of industrial plant and machinery, has utilised an Enerpac SL300 hydraulic gantry to install a sheet metal press brake.

The press brake was installed in two parts, each weighing 32,500 kg 32.5 tonnes and measuring 5.06 m x 2.86 m x 4.11 m.

To cope with the limited working height, MJ van Riel used a low loader to transport the press brake into the factory. Equipped with two-stage lifting cylinders, The SL300 gantry and a side-shift unit were utilised to ensure the parts were lifted and positioned accurately.

MJ van Riel used the gantry’s Intellilift wireless remote control for unobstructed views of the load, and accurate positioning of the press brake, says Enerpac.

www.enerpac.com

www.mjvanriel.nl

Heavy Lift | News

DS Lausnir lifts with Modulift

August 16 - Icelandic crane rental company DS Lausnir lifted a 45-tonne boat in Hafnarfjörður using Modulift spreader beams.
Views: 296

XLP members on the move

August 15 - Westdijk has transported a 98-ton (88.9-tonne) transformer from Ludvika to port of Gothenburg, Sweden on behalf of ABB.
Views: 406

GeoSea's divine delivery

August 14 - GeoSea has taken delivery of the self-propelled jack-up vessel Apollo.
Views: 459

Mammoet moves for Bridgewater

August 14 - Mammoet has transported a 3,152-ton (3,150.9-tonne) heat recovery steam generator (HRSG) module from Coeymans, New York to PSEG Power Connecticut’s Bridgeport Harbor Station 5 project site.
Views: 451

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.