Latest news from Heavy Lift & Project Forwarding International Magazine

Heavy Lift Across the World

Western picks Enerpac gantry for Humber project

Canadian heavy lift contractor, Western Mechanical, has used an Enerpac hydraulic gantry to replace bridge spans for the Humber River railroad bridge in Toronto, Canada.

Featuring a 24 m header beam, the gantry traversed the four-rail track bridge, allowing the 400-tonne bridge spans to be swapped out and replaced over the course of eight weekends.

Each span section weighed 400 tons (362.9 tonnes) and measured 100 ft (30.5 m) long, between 12-17 ft (3.7-5.2 m) wide and 9 ft (2.7 m) high.

Western Mechanical opted to use its Enerpac SBL1100 telescopic hydraulic gantry rather than a crane for the project. “The gantry is ideal for this type of heavy lift where you are handling a long, heavy structure. Using a crane would have been expensive, especially since all work on the bridge was carried out over eight weekends,” explained Rob Doucet, project manager for the heavy lift division of Western Mechanical.

The company installed its gantry track system parallel to the bridge and on either side. This approach relied on using a gantry header beam that was wider than the width of the bridge in order to avoid placing any excessive load on the partly deconstructed structure.

“We needed a header beam 24 m in length, which is far longer than we have used on past project lifts. Given the length of the header beam and load distribution, Enerpac recommended a wider header beam and modifications to the swivel interface where the header beam rested on the top of each gantry leg,” added Doucet.

Once the gantry was in place, Western Mechanical utilised the telescopic legs in order to lift the old spans clear of the bridge. The track system was then used to clear the structure, ready for the next span lift.

The Enerpac header beam and supporting side shift units moved the lifted span to awaiting railcars for onward transportation to the demolition yard.

www.westernmechanical.net

www.enerpac.com

Heavy Lift | News

Qatar Airways boosts B777 capacity thumbnail image

Qatar Airways boosts B777 capacity

June 24 - Qatar Airways Cargo has placed an order for five Boeing 777 freighters, enabling it to establish additional trade routes and increase capacity on key trade lanes.
Views: 133
Mammoet in Core partnership thumbnail image

Mammoet in Core partnership

June 21 - Mammoet USA has partnered with Core Industries, the owner and operator of Theodore Industrial Port near Mobile, Alabama.
Views: 570
Modern adds to fleet thumbnail image

Modern adds to fleet

June 21 - Ontario-based Modern Crane has received Canada’s first 300-tonne capacity Demag AC 300-6 all-terrain crane.
Views: 396

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.