Latest news from Heavy Lift & Project Forwarding International Magazine

Sarens praises Boom Booster

December 7 - Sarens Group utilised its Terex CC 8800-1 to lift and install a 641-tonne distillation column on the US Gulf Coast.

In order to lift the 87.1 m piece of petrochemical equipment, Sarens mobilised its 1,600-tonne lift capacity Terex CC 8800-11 crawler crane. However, the distillation column needed to be set at a 28 m radius and required a 96 m main boom length. In this configuration with the planned counterweight package, the CC 8800-1's capacity would be just over 736 tonnes - not quite enough to make the required lift.
 
Sarens equipped the crawler with Terex's Boom Booster kit, which increases the crane's capacity. "Our Boom Booster allows our 1,764-ton (1,600-tonne) class crane to out lift any crane model in the 1,100- to 2,200-US ton (1,000- to 2,000-tonne) class and some 3,300-US ton (3,000-tonne) capacity cranes under certain conditions," says Guntram Jakobs, product marketing manager for Terex Cranes.
 
The Boom Booster's lower and upper adapter segments flare out to 10 m wide, almost three times the standard boom width, which enhances the crane's structural integrity and increases lift capacities. Five, 10 m intermediate segments offer up to 50 m system length needs.
 
Travis Stav, Sarens' engineering manager, observed: "This increased the crane's lifting capacities by 5 percent for this configuration, giving us the necessary increased capacity and rigging headroom to lift the vessel."

Sarens organised a convoy of 92 trailers to load the CC 8800-1 crane components for the 320 km journey to the Gulf Coast construction site. "Since this is a series-produced crane none of its components are wider than 11.5 ft (3.5 m). And they all can be stripped down to a shipping weight of less than 44 US tons (40 tonnes)," said Jakobs.

As the trailers entered the jobsite, Sarens' 15-person crew began to assemble the crane, which took eight days to complete.

The crane was configured with a 108 m main boom and crews placed 470 tonnes of counterweight on the Superlift tray, which was operated at a 30 m radius. "Throughout the entire lift the CC 8800-1 crane ran smoothly," said Stav. "The operator was able to provide precise movements requested by the client to position the load with ease."

 
www.terex.com

www.sarens.com

Heavy Lift | News

Rodionov to join Fesco board thumbnail image

Rodionov to join Fesco board

February 28 - Ilya Rodionov will join Fesco’s management board as vice president of legal and corporate affairs on March 2.
Views: 113
Bulkchain prepares for launch thumbnail image

Bulkchain prepares for launch

February 28 - Antwerp-based NxtPort and Port+ will launch the Bulkchain central collaboration platform on October 5.
Views: 128
Lim steps up at G2 Ocean thumbnail image

Lim steps up at G2 Ocean

February 28 - G2 Ocean has appointed Sim Keat Lim as its vice president, Pacific, effective March 2.
Views: 105
Focus 30 construction progresses thumbnail image

Focus 30 construction progresses

February 28 - Construction is moving ahead for Mammoet’s first Focus 30 crane, which will be available for work later this year.
Views: 116

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.