Latest news from Heavy Lift & Project Forwarding International Magazine

HLI handles the pressure in yankee move 

HLI Rail & Rigging has moved a yankee dryer – a pressure vessel used in the production of tissue paper – 300 miles (482.8 km) from Erie to Lock Haven in Pennsylvania. 

According to HLI, with dimensions of 9 m x 5.7 m x 5.8 m and a weight of 130 tonnes, this is the largest piece of equipment to move out of Erie and it took 16 months to get permit approval from the Department of Transport (DOT). 

HLI chose a Trail King TK 350 perimeter frame trailer for the move. The total length of the combination was 217 ft 4 inches (66.2 m).

Among the challenges of the project, HLI had to find an alternative route to move the equipment as the initial proposal became impassable due to heavy rains in the summer of 2019. 

Once the alternative route had been decided, many signs and overhead obstructions needed to be removed; the central reservations of several highways needed filling so that the trailer combination could make ‘U’ turns to avoid fixed overhead obstructions; and 48 bridges needed engineering works. 

Along the route, the convoy had to tackle steep hills to climb through the Allegheny Forest and, in many places, the 6 m-wide trailer was the same width as the road, “which required careful management of the support bucket trucks to avoid major damage to property and enable the trucks to go around the load,” said HLI. 

HLI added that a third prime mover was on standby throughout the move, which was completed in 12 days, to assist up hills and deal with the winter road conditions.

Heavy Lift | News

KENC completes engineering scope for Jumbo thumbnail image

KENC completes engineering scope for Jumbo

February 21 - The Netherlands-based KENC Engineering has collaborated with Jumbo to prepare the heavy lift vessel Fairplayer for an FPSO installation project offshore Brazil. 
Views: 363
GS Express handles incinerator cargoes thumbnail image

GS Express handles incinerator cargoes

February 21 - GS Express Logistics has transported two parts of an incinerator from Penang Port to the Langkawi Incinerator plant in Kampung Belanga Pecah, Malaysia. 
Views: 328
Laso begins Alecrim-Urze wind farm project thumbnail image

Laso begins Alecrim-Urze wind farm project

February 20 - Laso Transportes has been tasked with the transport of several wind energy components for the Alecrim-Urze wind farm in Paúl da Serra, on the island of Madeira.
Views: 456

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.