Latest news from Heavy Lift & Project Forwarding International Magazine

Modulift performs locomotive lift

Modulift has provided equipment to lift a steam locomotive, built in 1926, on behalf of Swanage Railway, a tourist attraction in the UK.

The Southern Railway U Class 31806 is 40 ft (12.2 m) long and 12.6 ft (3.8 m) high, and its working weight with a full boiler and tender is 100 tons (90.7 tonnes).

The old locomotive needed to be lifted free of its wheels to allow for the replacement of the main bearings that had become worn over time.

Jordan Sibley, mechanical design engineer at Modulift, said: “There were no ideal points for the [20-tonne capacity] jacks to lift from directly so we chose to bridge the buffers with a lifting beam. The sloped bases of the jacks prevented them from getting close to the locomotive.

“Further, the jaws of the jack were significantly off the ground, which prevented us from sitting a beam directly on top of them as the height would be too great to fit under the buffers.”

The 3.5 m-long beams offered a 2.8 m operating span and weighed 585 kg (0.59 tonnes) each. The inverted L shape of the end plates allowed the beams to sit upon the locomotive jacks in a dropped position.

“This ensured that the beam could still get underneath the buffers when the jacks were in their lowest position, while offering enough stroke to lift the locomotive to the required height for access underneath,” Modulift said.

According to Graham Froud, workshop manager at Swanage Railway: “This is the first time this locomotive, which we brought into the workshop on a low-loader, has been lifted this way; all other lifts would have been done from above.”

www.modulift.com

Heavy Lift | News

Innovation overhauled thumbnail image

Innovation overhauled

September 20 - DEME’s offshore installation vessel Innovation has undergone a major refit at Damen’s Verolme shipyard in Rotterdam.
Views: 95
Sun shines with Chipolbrok thumbnail image

Sun shines with Chipolbrok

September 20 - Chipolbrok has delivered a range of heavy and oversized components using its vessel Chipolbrok Sun, including 56 wind turbine tower sections in Piteå, Sweden.
Views: 114
Pasquinelli in yacht move thumbnail image

Pasquinelli in yacht move

September 17 - Pasquinelli Spa has moved a 460-ton (417.3-tonne) yacht from Chioggia to Ancona, Italy.
Views: 495
Mammoet delivers first components for Saudi plant thumbnail image

Mammoet delivers first components for Saudi plant

September 16 - Samsung Engineering has contracted Mammoet to transport and install 49 modules for Jubail United Petrochemical’s ethylene oxide–ethylene glycol (EO/EG) plant in Saudi Arabia.
Views: 511

Heavy Lift Across The World

Discover heavy lift and project logistics industry news from around the world by region.