Under the jib equipment – Page 9
-
NewsModulift in action at Turcot Interchange
A Liebherr LTM 11200-9.1 mobile crane has lifted a girder using a Modulift MOD 110H spreader beam at a project in Canada.
-
NewsGreen Pin sizes up
Green Pin has introduced three new sizes of the Green Pin Tycan lifting chain and accompanying grade 10 steel components.
-
NewsRSS names Maslen
Rope and Sling Specialists (RSS) has named Sean Maslen as regional sales manager for southwest UK.
-
NewsRSS supports Antarctic project
Rope and Sling Specialists (RSS) has supplied BAM Nuttall Limited (BAM) with lifting and rigging products for use in the modernisation of the Rothera Research Station in the Antarctic.
-
NewsEquipment fit for a Viking
Irlequip has supplied a 50-tonne capacity Grove GMK3050 mobile crane and equipment from Modulift to lift handcrafted boats in Wicklow, Ireland.
-
NewsCrosby Group acquires Straightpoint
The Crosby Group has acquired load cell and force measurement equipment manufacturer Straightpoint.
-
NewsReducing risk during blade installations
Liebherr has developed a single-line guiding system (SLGS) for its LR 1750/2 and LG 1750 lattice boom cranes.
-
NewsScotload delivers stock shackle for CNOOC
Scotload has supplied a 1,000-tonne capacity load monitoring shackle for load testing operations at a China National Offshore Oil Corporation (CNOOC) project site.
-
NewsVersatile beams lift Mortenson project
Equipment supplied by Modulift was used to complete the construction of the citizenM Hotel in South Lake Union, Seattle, USA.
-
NewsFranklin Offshore ties up with Lankhorst Ropes
Franklin Offshore International and Lankhorst Ropes (part of WireCo WorldGroup) will collaborate to develop the market for fibre rope slings for heavy lift offshore projects in Southeast Asia.
-
NewsLGH takes Straightpoint load cells
US lifting equipment rental specialist Lifting Gear Hire (LGH) is overhauling its load cell fleet with an order for Straightpoint (SP) Radiolink plus units of up to 220,000-lb (99.8-tonne) capacity.
-
NewsModulift beams lift for Lancaster
Bridon-Bekaert Ropes Group has utilised two Modulift spreader beams to lift a series of sheathed spiral strand mooring lines, manufactured at the former’s Neptune Quay facility in Newcastle, UK, for Bluewater Energy Services.
-
NewsRanger expands headquarters
Australia’s Ranger Lifting will mark 20 years in the lifting and rigging industry by opening a facility in Prestons, Sydney.
-
.jpg)
NewsModulift partners with Maxirig
Australia’s Maxirig has signed a deal with below-the-hook equipment manufacturer, Modulift, to stock its full range of standard modular spreader beams.
-
NewsModulift works with Siemens HTT on bespoke rigs
Lifting equipment manufacturer Modulift teamed up with Siemens Heat Transfer Technology (Siemens HTT) to design bespoke rigs for lifting modules each weighing approximately 200 tonnes.
-
NewsStraightpoint supports module lifts
Straightpoint load cells were added to a custom-built lifting frame to raise refinery modules in Saint John, Canada.
-
NewsMammoet lifts with Green Pin Tycan
Netherlands-headquartered Mammoet has become the world’s first user of Green Pin Tycan chain for lifting operations, according to Green Pin Tycan manufacturer, Van Beest.
-
NewsModulift supplies for subsea installation
Modulift has refurbished two subsea spreader beams to lift 260-tonne and 280-tonne manifolds for an oil and gas project, offshore Libya.
-
NewsStraightpoint partners with Onursan
Straightpoint has named Onursan as a distributor of its load cells and force measurement equipment in Turkey.
-
NewsCaldwell partners with RUD Chain
Under-the-jib equipment and rigging suppliers Caldwell Lifting Solutions and the RUD Group have combined their sales and service activities for their lifting and material handling solutions in the USA and Canada.