Under the jib news – Page 6
-
NewsPGA named Eilon distributor
Eilon Engineering, a manufacturer of load monitoring and overload prevention systems, has appointed PGA Calibration as a distributor in the Philippines.
-
NewsHuisman upscales 3D-printed hooks
Huisman has successfully tested four 3D-printed, 350-tonne lifting capacity crane hooks under the supervision of certification authority Lloyd’s Register.
-
NewsCheckedOK upgraded
Asset management software firm CoreRFID has upgraded its CheckedOK reporting tool for the lifting and hoist industry.
-
NewsEnerpac raises the bar
Enerpac Heavy Lifting Technology has successfully completed a side-load stability test of its self-locking cube jack, the SCJ-100, at its factory in Hengelo, the Netherlands.
-
NewsLankhorst lifts for Yunlin
Jumbo has deployed slings from under-the-jib equipment and rigging equipment supplier Lankhorst Ropes to install transition pieces onto monopiles at the Yunlin wind farm in Taiwan.
-
NewsModulift frame rules the waves
A custom-made lifting frame designed by Modulift has been utilised to lower Mocean Energy’s Blue X wave energy prototype into the North Sea.
-
NewsCrosby acquires Speedbinders
The Crosby Group has acquired Speedbinders, a USA-based designer and manufacturer of load binders for heavy-duty load securement.
-
NewsHampidjan Offshore launches TERRA slings
Hampidjan Offshore has launched completely recyclable heavy lift slings for the offshore and onshore construction market.
-
NewsSamson offers bio-sourced ropes
USA-based Samson Rope is offering several of its products – AmSteel-Blue, AmSteel-X, Saturn-12, EverSteel-X, and Turbo-RC – with the options of sustainable, bio-sourced fibre.
-
NewsVerton names Red Rooster as distributor
Verton Technologies has appointed Red Rooster Lifting as its load control equipment distributor in the UK.
-
NewsModulift adds to spreader beam range
Under-the-jib equipment manufacturer Modulift has expanded its range of modular spreader beams with the MOD 1100/2000.
-
NewsECOL discusses rigger training
The European Crane Operator Licence (ECOL) is in talks about the possibility of developing a rigger training scheme to run alongside its other courses.
-
NewsModulift, pewag and LMS team up
Under-the-jib equipment manufacturer Modulift, chain manufacturer pewag group, and Aberdeen-based Load Monitoring Systems (LMS) have formed a strategic partnership.
-
NewsCaldwell revamps website
Lifting equipment manufacturer Caldwell has launched its revamped website as part of the company’s rebranding.
-
NewsElebia launches NEO60
Lifting solutions manufacturer Elebia has expanded its range of NEO lifting hooks with the launch of the NEO60.
-
NewsTurbines get a lift with ematec
Wind turbine manufacturer Enercon has ordered six rotor blade lifters from under-the-jib equipment supplier ematec.
-
NewsCrosby ready to support renewable energy
Crosby|Feubo has designed, manufactured and tested long-term mooring shackles for a floating offshore wind turbine project.
-
NewsEngineered Rigging’s strand jack solution
Engineered Rigging deployed Enerpac strand jacks to lift and install precast bridge segments for the Cline Avenue Bridge over the Indiana Harbour in East Chicago, USA.
-
NewsRSS completes load test
UK-based Rope and Sling Specialists (RSS) has completed a proof load test for two 140-tonne capacity truss lifting beams on behalf of Sheffield-based TFL Responsive Engineering.
-
NewsVerton partners with Crosby
The Crosby Group has invested in Australia-based Verton Technologies. The companies will collaborate to accelerate the adoption of Verton’s remote-control load orientation solutions.