All Enerpac Tool Group articles – Page 2
-
NewsPHL deploys cube jacks for industrial lift
PHL Hydraulics Ireland has used 16 Enerpac cube jacks for the synchronised lifting of a 160-tonne racking system at a large industrial facility.
-
NewsEVO-P launch
Enerpac has launched its EVO-P pump-per-point synchronous lift system, which it said makes the multi-point lifting and positioning of large structures faster and more precise.
-
NewsBovis deploys Enerpac equipment
Bovis Group has used a combination of Enerpac SCJ-50 cube jacks and an Enerpac ETR-series trolley system to install an 80-tonne press at a French seal manufacturer.
-
NewsEdwards executes OOG move
Edwards Moving & Rigging has handled a turbine and a generator on behalf of a large EPC contractor.
-
NewsEnerpac system used for Dubai wheel
An Enerpac push-pull system has been used to construct the Ain Dubai observation wheel in the UAE.
-
NewsEnerpac systems deployed for Saint-Nazaire
DEME Offshore deployed Enerpac’s hydraulic levelling and fixation systems to install 80 General Electric wind turbines at the Saint-Nazaire offshore wind farm in France.
-
NewsAmico boosts ShipLift system with Enerpac
Enerpac Heavy Lifting Technology has supplied a heavy lift trolley system to Genoa-based Amico & Co to assist in the lifting and transportation of yachts weighing up to 4,000 tons (3,600 tonnes).
-
NewsEnerpac in offshore rig operation
Environment and energy company Enaval deployed Enerpac’s super lift hydraulic gantry to perform maintenance work on a Petrobas offshore natural gas platform off the coast of Brazil.
-
NewsEnerpac levels up trolley system
Enerpac has enhanced its ETR-Series trolley system with higher capacity trolleys and swivel plates, to accommodate header beams and other lifting systems.
-
NewsEnerpac launches ML40
Enerpac has introduced its ML40 mini lift gantry, designed to move machinery and equipment in compact spaces.
-
NewsEnerpac raises the bar
Enerpac Heavy Lifting Technology has successfully completed a side-load stability test of its self-locking cube jack, the SCJ-100, at its factory in Hengelo, the Netherlands.
-
NewsMegakran supports machinery moves
Megakran has utilised its Enerpac SL400N hydraulic gantry to move an 85-tonne sheet metal press between factories in Somogy County in southwest Hungary.
-
NewsSC&RA elects board
The Specialized Carriers & Rigging Association (SC&RA) has elected Kevin Johnston from J&R Engineering as president for the 2021-2022 term.
-
NewsSimulator success for Al Faris and Enerpac
Al Faris has utilised Enerpac SCJ-50 self-locking cube jacks to lift a Boeing 747 pilot training simulator.
-
NewsEnerpac gantry put to work in Algeria
Global Freight Transit has utilised an Enerpac SBL1100 hydraulic gantry to remove a 470-tonne generator at the Koudiet Eddraouch power station in El-Tarf, Algeria.
-
NewsEnerpac expands heavy lift capabilities
Enerpac has added split-flow pump upgrade kits that are able to network multiple pumps and lift points for higher accuracy synchronisation.
-
NewsAytecma completes engine swap
Spanish heavy lift contractor Aytecma has used Enerpac cube jacks to switch out a vessel’s engine.
-
NewsEngineered Rigging’s strand jack solution
Engineered Rigging deployed Enerpac strand jacks to lift and install precast bridge segments for the Cline Avenue Bridge over the Indiana Harbour in East Chicago, USA.
-
-
NewsHareket lifts with Enerpac
Hareket Heavy Lifting and Project Transportation has deployed Enerpac strand jacks to install super-heater and vaporisation modules at a waste-to-energy (WTE) facility in Sharjah, the UAE.